Double Stage Cutter Compactor Recycling Pelletizing Line Featured Image

Mohaho o Habeli oa Mokha oa Compactor Recycling Pelletizing Line

Tlhaloso e Khutšoanyane:

Likarolo tse peli tsa ho sebelisa hape le mohala oa tlhahiso ea granulation bakeng sa silo ea compaction ea filimi ea PE PP PET

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Litlhaloso

^{Lintlha tse Recycled Material}	HDPE, LDPE, PP, BOPP, CPP, OPP, PA, PC, PS, PU, ABS
^{Sebopeho sa Sisteme}	Lebanta la Conveyor, Compactor e Sehang, Sing Screw Extruder, Filtration,Pelletizer, Sesebelisoa sa ho Pholisa Metsi, Karolo ea Dehydration, Conveyor Fan, Silo ea Sehlahisoa.
Thepa ea Screw	38CrMoAlA (SACM-645), Bimetal (Boikhethelo)
L/D ea Screw	28/1, 30/1, 33/1, (Ho ea ka litšobotsi tsa ho tsosolosa)
Heater ea Barrel	Hitara ea ceramic kapa hitara ea Far-infrared
Pholiso ea Barrel	Pholiso ea moea ea li-fan ka li-blower
Mofuta oa Pelletizing	Pelletizing/ Boetsuwa ba ho peta ka tlasa metsi
Litšebeletso tsa Theknoloji	moralo oa morero, kaho ea fektheri, ho kenya le likhothaletso, ho laela
Moetso oa Mochini	Sekontiri			L/D	Single Screw Extruder
	Bolumo	Matla a Motlakase	Screw Diameter		Extruder motor	Bokhoni ba tlhahiso
	(Lithara)	(kw)	(mm)		(kw)	(kg/h)
XY-85	350	37	85	28	55	150-250
				10	22
XY-100	500	55	100	28	90	250-350
				10	30
XY-130	850	90	130	28	132	450-550
				10	45
XY-160	1100	110-132	160	28	185	650-800
				10	55
XY-180	1500	185	180	28	250-280	900-1100
				10	90

Sistimi ea "Cutter Compactor Plastic Recycling" ea Pelletizing

Letoto la compacting le pelletizing system e kopanya ts'ebetso ea ho silakanya, ho kopanya, polasetiki le pelletizing ho mohato o le mong.E sebelisoa ka mokhoa oa ho tsosolosa le ho etsa pelletizing.ACSH TM system ke tharollo e ka tšeptjoang le e sebetsang hantle bakeng sa filimi ea polasetiki, li-raffias, filaments, mekotla, mekotla e lohiloeng le thepa e phophomang ea repelletizing.Matsete a tlase bakeng sa mochini o sebetsang hantle.E ka fana ka tlhahiso e phahameng empa ka ts'ebeliso e tlase ea matla.Kopo: PE,PP,PS,ABS,XPS,EPS,PVB.

Ho fepa

E le moralo o tloaelehileng, likhechana tsa polasetiki tse kang filimi, filament, li-raffias li fetisetsoa ka kamoreng ea ho kopanya ka lebanta le conveyor;ho sebetsana le likhechana tsa rolls, roll huling off device ke mokhoa oa boikhethelo oa ho fepa.Lisebelisoa tsa motlakase tsa lebanta le tsamaisang thepa le sesebelisoa sa ho hula li sebelisana le inverter.Lebelo la ho fepa la lebanta la conveyor kapa ho hula rolo le ikemela ka botlalo ho ipapisitse le hore na kamore ea komporo e tletse hakae.

PHATLALATSO LE PHATLALA

Compactor e na le sesebelisoa sa ho qeta moea.Ka mosebetsi oa mochine oa thipa ea rotor le thipa ea stator ka tlaase ho compactor, mocheso oa compactor le thepa e tla eketseha butle-butle ka mor'a ho itšeha ho tsoelang pele le likhohlano, 'me mongobo le lerōle holim'a thepa e tala li tla phaphamala ho ea holimo ho compactor.Sesebelisoa se ka tlosa mongobo le lerōle ka katleho, tse tla qoba ho sebelisa matla a eketsehileng a matla ho sebetsana le mongobo.Compactor ena e kopanya ho futhumatsa pele, ho omella pele le ho fokotsa boholo ho etsa bonnete ba hore ho potlakile le ho tsitsisa.mokhoa oa ho fepa.

Maqhubu a Rotatory Of Compactor

Lehare le potolohang le lehare le tsitsitseng li khaola thepa ka li-flakes tse nyane.Ho futhumala ha likhohlano tse hlahisoang ke li-blades tse potolohang ka lebelo le phahameng ho tla chesa le ho honyela li-flakes.

Single Screw Extruder

Moralo oa rona o ikhethang oa screw extruder ka bonolo o etsa polasetiki le ho etsa lisebelisoa homogenizes.Extruder ea rona ea bi-metal e na le anti-corrosion e hanyetsanang haholo, e sa senyeheng ebile e phela nako e telele.

Libaka tse Hlatsoang Habeli tsa Vacuum

Ka libaka tse peli tsa vacuum degassing, tse sa tsitsang tse kang limolek'hule tse nyenyane le mongobo li tla tlosoa ka katleho ho ntlafatsa boleng ba li-granules, haholo-holo tse loketseng thepa e hatisitsoeng e boima.

Phetoho ea skrine ea Mofuta oa Plate

Setlhopha sa mofuta oa Plate se entsoe ka mofuta o tsoelang pele o nang le lipoleiti tse peli tsa sefe.Ho na le bonyane filthara e le 'ngoe e sebetsang ha skrini se fetoha.Hitara e nang le sebōpeho sa lesale bakeng sa ho futhumatsa ka tsela e tsitsitseng le e tsitsitseng.

Sefe ea Mofuta oa Piston ea None-Stop

1.Mochine o tloaelehileng oa mochine o le mong oa mochine o le mong / piston ea habeli-station kapa o sa emeng habeli oa poleiti / piston ea liteishene tse 'nè e ka kenngoa hloohong ea extruder ho hlahisa ts'ebetso ea bohlokoa ea ho hloekisa.
2. Nako e telele ea skrineng, sekhahla se tlase sa phetoho ea skrini: Nako e telele ea sefahla ka lebaka la libaka tse kholo tsa filthara.
3. Ho bonolo ho sebelisa le mofuta o sa emeng: phetoho e bonolo le e potlakileng ea skrine mme ha ho hlokahale hore e emise mochine o sebetsang.
4.Litsenyehelo tse tlase haholo tsa ts'ebetso.

Mould oa Leqhoele

Mofuta oa molamu oa ho hula o sebelisoa haholo, 'me lisebelisoa tse tala tse kang PP, PE, ABS, PET, joalo-joalo li ka sebelisoa moruong le moruong.

Plastic granulation line tsidifatso TANK

Plastic Granulation Line Cooling TANK

1.Sefe e tsoetseng pele ea ho thothomela e kopanyang ka mokhoa o tšekaletseng oa mofuta oa centrifugal dewatering e hlahisa li-pellets tse omisitsoeng tse sebetsang hantle le tšebeliso e tlase ea matla.
2. Kopanya li-sieves: Li-sieve li kenngoa 'me li lokisoa ka li-screws ho e-na le li-welding, kahoo u ka fetola li-sieve habonolo nakong e tlang.